How to Replace a Kia Sportage Replacement Key
The key of a lot of Kia models comes with the keyless entry feature built in. The key functions like the remote control, and is exchangeable by an Kia dealer.
Key fobs might stop working due to a number of reasons, such as the battery being dead, worn-out buttons signal interference or water damage. Here are some helpful tips to assist you in getting your Kia sportage replacement key to work again.
How to replace the remote key or smart key?
The battery in your Kia's intelligent key will eventually need to be replaced, whether it's a remote key or a push-to-start one, or a normal metal key that is not equipped with transponder. This is particularly relevant if your vehicle displays a message telling you that the smart or remote keys have low battery power.
It's an easy procedure. To replace the battery of the keyfob, remove your mechanical key from the slit at the back of the fob. Then, you need to pry the cover open. A small screw is found inside the key fob to keep the battery in its place. Remove the old battery by unscrewing the screw using the help of a small screwdriver. Insert the new battery and then close the opening on the key fob.
Test the key fob by pressing the lock and unlock buttons. If the doors lock and unlock as expected, then you're good to go! You can now use the hands-free feature to lock and unlock your Kia whenever your fingers feel chilly or when you need to run errands around Brandon.
Not all key fobs could need to be programmed (transponder chips or smart keys). This requires a specific programming machine that only the dealer or locksmith can access. Other keys (non-transponder metal keys) do not require programming. If your key requires to be programmed, you must know the key code number printed on the tag that identifies the key and save it in a safe place.
How do I replace the battery?
If your Kia key fob isn't responding when you press the lock or unlock button on the fob, this is a clear indication that the battery needs to be replaced. A low battery may cause other issues, like the check engine light coming on or the engine not running correctly. It is easy to replace the key fob batteries using just a few simple tools.
Before beginning the process ensure that your vehicle is off and all doors are closed. Find the small, metal or plastic piece at the bottom of your key fob, and play with it until a metallic key slides out. You can then insert this key into the handle on the door of your driver to unlock your car.
To replace the key fob's battery, remove the cover at the rear and use a plastic bar tool to remove the latch holding the black negative battery cable. Remove the old battery and align the new battery so that the "+" positive side faces you and the "-" negative side is facing towards the fob's electronic contacts. Push the new CR2032 battery straight into place and avoid excessive force to avoid bending or damaging the contacts on the metal.
After the new battery has been installed then turn the key fob off and on in the ignition repeatedly until the door locks cycle. Then you can test your Kia key fob to check if it is working properly again.
How can you replace the smart key?
You may have either a standard keyfob or a Smart Key based on the model of Kia Sportage. The smart key features an embedded mechanical key blade, while the standard key fob does not. Both key fobs are equipped with an internal battery that will eventually require replacing. This is a straightforward process that takes only two minutes.
Before you get started, you will want to make sure that you are on a level surface with enough lighting and that your Kia is not on. Be aware that there are tiny pieces inside the fob that can be removed if not careful.
The release button for the small size is located on the lower backside. It can be a circular silver button or a rectangular slot. You can open the key fob by pressing the button.
After the key fob has been opened, take out the battery. The new battery is a the CR-2032, and it can be purchased through the internet or at a local auto parts store. Once you're done, your key fob should permit you to lock and unlock your vehicle, even if it isn't running.
How do thekeylab.co.uk replace a mechanical key
The Kia keyfob is an excellent convenience, allowing us to lock or unlock our car by pressing one button. But, as with all devices there are issues with it from time to time. Luckily, there are steps to take to troubleshoot these issues and ensure that our key fobs are in good working order over the long haul.
One of the most common problems is a weak or dead battery. This could cause your device to stop working or work intermittently. If this is what you are experiencing you should replace the battery a new one.
If this doesn't resolve the issue you can try using a standard flathead screwdriver to open the casing of the fob's plastic. Be sure not to damage any internal components, or scratch the plastic. Once the battery is opened, carefully remove the battery that was removed and replace it with a brand new one.
Close and open the door using the mechanical key. (Every Kia fob comes with a spare mechanical key which will fit into the slot). Test the key fob and verify that it's working properly. If the key fob isn't working, call a dealer or locksmith to help solve the problem. Make sure they cut you an emergency key that functions for all trunk and door cylinders to avoid future lockouts.